Historic Door Repair in North End and East End Boise Homes
Pre-1955 doors in the North End, East End, and Warm Springs neighborhoods of Boise are solid wood panel doors with mortise lock sets, original hardware, and wood frames that have been painted and repainted dozens of times. These doors have genuine architectural character that is irreplaceable. When they stick from wood swell, we assess whether the cause is frame racking from foundation movement, paint film buildup at the sash edge, or genuine wood expansion. When lock sets fail, we source period-appropriate replacement mortise locks and hardware rather than replacing the door with a modern slab and losing the home's character.
Sliding Patio Door Repair in Boise Homes
Sliding patio doors in Boise homes fail from the same mechanism regardless of the neighborhood: the bottom rollers flatten from years of load cycling, the aluminum track develops bends from thermal expansion, and the door begins grinding and jumping at the bend point when operated. We replace roller assemblies, address track damage, and adjust door height to eliminate bottom drag. In Boise homes where the patio door was installed against a wood subfloor rather than a concrete slab, track replacement is more accessible. In slab-on-grade homes, track overlay systems are assessed when the embedded track cannot be replaced cleanly.
Window Repair in Older Boise Homes
Boise's pre-1980 homes have original wood single-hung windows with rope-and-pulley or chain-and-counterweight sash balance systems, and aluminum windows from the 1960s and 1970s that have outlasted their original rubber seal glazing tape and are now single-pane with significant thermal loss. Rope and pulley window repair involves threading new sash cord through the original rope channel, reconnecting to the counterweight in the weight pocket, and reattaching the sash. This restores the original operating feel without replacement. Aluminum window glazing tape replacement re-seals the glass in the frame without full window replacement.
Weatherstripping and Entry Door Seal Replacement
Entry doors in Boise homes face the same high-desert climate stress as all building materials in the Treasure Valley: extreme UV in summer, freezing temperatures in winter, and seasonal humidity swings that cause door slab dimensions to change. Weatherstripping fails from UV degradation and compression set. We replace door perimeter weatherstripping with compression bulb or Q-lon products rated for the temperature range, replace the threshold sweep at the door base, and verify the threshold sill plate is properly sealed to the concrete or wood sill below.
Interior Door Hinge and Latch Repair Across Boise Home Eras
Interior door problems in Boise homes vary by era. In North End and East End historic homes, the doors are solid wood and the frames are solid wood, so hinge screws hold reliably but frame racking from decades of foundation movement is the primary cause of sticking and non-latching doors. In post-1990 subdivision homes, MDF door frames hold hinge screws poorly at the top hinge where door weight creates the most leverage, and the frames have moved from framing settlement in the first decade. We identify which condition applies before any material is removed from the door or frame.
Lock Set Replacement and Rekeying in Boise Homes
Lock set replacement in Boise homes covers a wider range of hardware configurations than Meridian's newer construction. Historic homes may have original mortise locks that are repairable or need compatible replacement units. Mid-century homes have standard cylindrical deadbolt and passage set configurations. Older rentals in the Vista and Bench neighborhoods may have multiple lock generations accumulated over decades of tenants. We rekey Schlage, Kwikset, and Weslock mechanisms where the hardware is sound, replace full lock sets where the mechanism is worn or the door prep needs updating, and install smart lock hardware in deadbolt-prep doors on request.
Garage Door Adjustment and Fire Door Compliance
Attached garage entry doors in Boise homes must be fire-rated with a functioning self-closer. Pre-sale inspectors in Ada County consistently flag missing or non-functional self-closers as a deficiency. We assess the door's fire rating, install or replace the self-closer, check the door sweep seal, and confirm the hardware does not prevent the self-closer from functioning. In older Boise homes with original interior garage doors that are not fire-rated, we advise on the full replacement requirement and can supply and hang a code-compliant solid-core door in the existing frame when the rough opening permits it.